BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-87
Operation 5
Important safety instructions for machine travel on public roads
with the pallet forks
In Germany, machine travel on public roads with attached pallet forks that
do not have foldable fork arms is prohibited!
Do not transport the pallet forks in a bucket fitted onto the machine!
• For machine travel on public roads, remove the pallet forks without
foldable fork arms and transport them with a suitable means of
transport (trailer).
Get informed on and follow the legal regulations of your country.
Pallet forks with foldable fork arms (opt)
Preparing road travel:
1. Remove the safety pin on the fork arms (2 x).
2. Fold up the fork arms.
3. Install the safety pin on the fork arms (2 x).
4. Lower the loader unit to transport position
(ground clearance about 250 mm/9.84 in).
Get informed on and follow the legal regulations of your country!
Important information on picking up loads
• Approach the material as closely as possible!
• Always approach the material with the machine
wheels in straight-ahead position!
• Always load on firm and level ground with sufficient load-bearing
capacity only!
• Never raise a load with only one fork arm!
• Move the fork arms all the way through under the pallets, as far as they
will go, so that the load is picked up the nearest
possible to the fork frame!
• Move under the load with the straight fork arms as far apart as possible
and at an equal distance from the left and right side of the load!
To Next Page
Loading...
Need help?
General
