6-2 BA 357-00 * 3.0 * 35700_06_Transport.fm
6 Transport
Before towing away
In case of power failure, the automatic parking brake must be released
manually. To do this, two cheese-head M 6x60 mm screws are needed
(DIN EN ISO 4762). The screws are included in the scope of delivery of
the vehicle. Keep these screws in the vehicle for emergencies.
General instructions
Accident hazard due to released parking brake!
The machine can roll away unintentionally if the parking brake is released
manually. Serious injuries and death can result.
► Before releasing the parking brake, secure the machine against
unintentional movement
(for example by placing chocks under the wheels).
► Do not release the brake on slopes.
► Do not park the machine with a released brake.
► Enable the brake again once towing is over.
The brake can jam when screwing in the hexagon socket protrude screw.
► Screw in both hexagon socket protrude screws at the same time. To do
this, alternately screw in each screw a maximum of one turn at a time.
Once towing is over, immediately put the parking brake back to the
original setting.
To Next Page
Loading...
Need help?
General
