BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-15
Maintenance 7
Overview: Fluids and lubricants (part 2)
Coolant
Only use the coolant additives specified in table “Overview of lubricants” –
see page 7-14.
Dispose of throwaway containers according to national regulations.
Component/
application
Capacities
1
Fluid/lubricant
2
SAE grade
Specification
Season/
temperature
Braking system 0.5 l (0.13 gal) Brake fluid
3
ATF Suffix type A –
Washer system
Water
0.5 l (0.13 gal)
Antifreeze
1.0 l (0.26 gal)
Cleaning agent Water + antifreeze
Year-round
−20 °C (−4 °F)
Air conditioning (option)
4
About 0.85 kg
(1.87 lb)
Refrigerant R 134a –
Aggressive media
5
(option)
As required
Anti-corrosion
protection
ELASKON 2000 ML,
ELASKON UBS light,
ELASKON Aero 46
special,
ELASKON Multi 80
Year-round
1. The capacities indicated are approximate values; the oil level check alone is relevant for the correct oil level.
2. Bear in mind the safety data sheet of the engine/machine fluids.
3. In order to avoid braking system failure, use only ATF brake fluids.
4. Maintenance may only be performed by the trained technical personnel of an authorized service center.
5. Have the sealing checked and repaired at least once a year by ELASKON – see the Elaskon servicing pass supplied with the machine.
To Next Page
Loading...