BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-23
Maintenance 7
Cleaning the exterior of the machine
Damage to machine due to cleaning work.
► Pay attention to the lower side in particular when cleaning the
machine.
➥ The cooling of components is impaired by a strong accumulation of
dirt on the engines and on the transmission. This can lead to
overheating.
► Do not damage the radiator fins when cleaning with a high-pressure
cleaner.
► Do not point the water jet of the high-pressure cleaner at the seals of
hydraulic cylinders.
► Do not clean sensitive electrical components (motors, power
electronics, instrument panels, connectors etc.) using a high-pressure
cleaner – see "Cleaning the engines" on page 7-24.
Damage to paint coating, articulations, threaded fittings, etc., due to
corrosion can occur if the machine is used in a saline environment.
► Clean the machine thoroughly with water after any travel on saline
ground conditions or roads and going to a different site!
The following aids are recommended for cleaning:
• High-pressure cleaner
• Steam jet
• Compressed air
•Broom
To Next Page
Loading...