BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-77
Maintenance 7
Tire and compressed air check
Observe the maintenance intervals
– see "Maintenance plan" on page 7-6.
Regular checks for damage and of the tire pressure increase operational
safety and the service life of the tires, and reduce the machine’s
downtimes.
1. Park the machine on firm, level and dry ground.
2. Apply the parking brake.
3. Lower the loader unit to the ground.
4. Actuate the motor isolating switch.
5. Turn the machine off and remove the ignition key.
6. Check the tires and the rims – also on the inside – for cracks, aging
and tread thickness.
7. Remove foreign bodies from the tire tread.
8. Remove traces of oil and grease from the tires.
9. Check the wheel nuts for correct seating and retighten them if
necessary
– see chapter 9 “Specific tightening torques” on page 9-14.
10.Unscrew the protective cap from the tire valve.
11.Connect the measuring instrument.
12.Check the tire pressure with a measuring instrument.
➥ Refer to the notice sign on the front window or Tires on page 9-6 in
this Operator's Manual.
13.If necessary, inflate the tire to the prescribed pressure.
14.Take off the measuring instrument.
15.Screw the protective cap onto the tire valve.
To Next Page
Loading...