BA 357-00 * 3.0 * Sicherheit_E.fm 2-23
Safety 2
Noise
• Observe the noise regulations
(for example, during applications in enclosed premises).
• Bear in mind external sources of noise
(compressed-air hammer, concrete saw).
• Do not remove the sound baffles of the machine/attachment.
• Have damaged sound baffles immediately replaced
(for example, an insulating mat, muffler).
• Before starting work, get informed on the noise level of the machine/
attachment (for example on the adhesive label) – wear ear protectors.
• Do not wear ear protectors during machine travel on public roads/sites.
Cleaning
• When using compressed air or a high-pressure cleaner,
there is a risk of injury from splashing parts.
- Wear appropriate protective clothes.
• Do not use any dangerous and aggressive detergents.
- Wear appropriate protective clothes.
• Operate the machine only in a clean condition.
- Remove all dirt, snow and ice from climbing aids
(for example, handholds, footholds, handrails).
- Keep the cabin glazing and visual aids clean.
- Keep the light system and reflectors clean.
- Keep the control elements and indicators clean.
- Keep the safety, warning and information labels clean, and replace
damaged and missing labels by new ones.
• Perform cleaning work only if the machine is
stopped and cooled down.
• Bear in mind sensitive components and protect them accordingly
(for example electronic control units, relays).
• Keep batteries clean and dry at all times in order
to avoid leakage currents.
To Next Page
Loading...
Need help?
General
