3-24 BA 357-00 * 3.0 * 35700_03_Einleitung.fm
3 Introduction
Overview: Attachments for EURO quickhitch facility
In order to ensure the parallel lift of the pallet forks and the correct
scraping depth of the bucket, observe the following points before installing
EURO attachments.
► Angle A – formed by rear of pallet forks and line between catch hooks
and lock bores: 7°
► Distance B – between lock bores and lower edge
of bucket: 200 mm (0.86 in) minimum.
For more information about attaching devices, see:
data sheet for attachments §30 para. 10/11/12 StVZO (Germany)
Leaflet with specific instructions for hitching agricultural or forestry equipment onto the machine according to German legislation
Leaflet with specific instructions for hitching winter service equipment onto the machine according to German legislation
Description
of attachment
Vehicle
Part no.
(model)
mm (in)
Capacity
1
m³ (ft³)
Application
material density
Non-approved attachments for machine travel on public roads (Germany)
Pallet forks
357-00S
357-00L
1000241148
1200
(47.24)
–
Picking up and
transporting pallets and
stacked material
1. Capacity struck according to ISO 7546/capacity heaped
To Next Page
Loading...
Need help?
General
