Appendix VI—CE Racked Assembly LTN Assembly
wc_tx001217gb.fm 110
14.8 Attaching the Lights
Materials
needed
Light fixtures (4)
Hardware Bag 6 (Tower Lights Hardware)
Procedure
Follow the procedure below to attach the lights to the tower.
Attach the four light fixtures (CC) to the light bar as follows:
1. Position each light fixture so that the lamp is facing downward.
2. Attach each light fixture to the light bar using an M18 lock nut (CC1) and a B19
flat washer (CC2).
wc_gr00653
BB
BB
CC3
BB3
CC1
CC2
BB1
BB2
CC
To Next Page
Loading...