Factory Installed Options LTN
50 wc_tx001650gb.fm
5 Factory Installed Options
This machine may be equipped with one or more of the following factory-installed
options. To verify if any of these options are installed on your machine, contact
Wacker Neuson Corporation at 1-800-770-0957. A nameplate listing the Model
Number, Item Number, Revision, and Serial Number is attached to each unit.
Please have this information available when contacting Wacker Neuson
Corporation.
The illustrations shown in this chapter represent typical installations. The factory-
installed options on your machine may look different.
5.1 Block Heater
The engine block heater option includes a block heater (a) with a cord (b).
The function of the block heater is to heat the engine coolant/ engine block
to improve cold-weather engine starting. Plug the cord into a 120V power
supply.
wc_gr006975
a
b
To Next Page
Loading...
Need help?
General
