Wallace Perimeter Security SPEEDGATE - Page 36

36
wallaceperimetersecurity.comPhone: 866.300.1110
EXTERNAL ENTRAPMENT SENSOR TYPES
ORIGINAL GATE
POSITION
Obstacle
Detected,
Acvang Photo
Eye Input
Gate Response
Closing Yes Gate should reverse to open posion and restart the auto close
mer.
Closing Yes Gate should reverse to open posion; if it encounters another
infrared beam (photo eye) input* during reversing, another acve
safety input is triggered.
*or an edge sensor input, if programmed in the same manner as the photo eye
Closing Yes Gate should reverse to open posion; if it encounters an obstacle
([via the IES (inherent reduced speed sensor/torque change
sensor)] during reversing = hard shutdown.