Wasp 3MT HDP - Residual Risk of Electrocution; Maintenance and Cleaning Safety

READ CAREFULLY
THE USER MANUAL
BEFORE OPERATING
ON THE MACHINE
IntroductIon
© WASP S.r.l.
1
11
1
Residual risk of electrocution
CAUTION:
It is present tension on the control unit.
Maintanance / Cleaning
Maintenance / cleaning operations must be carried out by trained and authorized personnel. Operations must be
performed in a safe stop condition, disconnecting the printer from power sources. Refer to chapter 7 “Ordinary
and Extraordinary Maintenance”.
Legend:
Hot surface, do not touch: risk of burns
WARNING
DO NOT ENTER
WHEN MACHINE
IS WORKING
Pay attention to the hot pad, risk of burns
READ CAREFULLY
THE USER MANUAL
BEFORE OPERATING
ON THE MACHINE
WARNING
DO NOT ENTER
WHEN MACHINE
IS WORKING