IntroductIon
© WASP S.r.l.
5
Introduction
0 INTRODUCTION
0.1. Aim of the instruction manual
IMPORTANT:
Before proceeding with the installing and starting of the printer, the technician, the user, the
maintainer and the safety responsible must read and understand the manual.
The Manual must be considered as a fundamental part of the printer. The correct use and maintanence of the
machine depends on the informations contained here.
The Manual contains instructions that must be acknowledged by the operator devoted to the use, maintanance
and transport of the machine, supposing the adequate experience, preparation and professional abilitation as
well as a psychophysical attitude.
For certain operations it may be necessary to ask for the intervent of personnel who. have achieved a specific
preparation.
The Manual must always be available for consultation, in copy and by the recipient, on the printer itself or in its
immediate vicinity. In the second case the location of the manula must me indicated on the printer clearly.
The Manual is susceptible to updates which, appropriately classified, will be transmitted to the user/owner in
order to update the consultation copy (s).
• The recipient must ensure that the personnel authorized by him/her to start up, use, maintain and transport
the printer have obtained adequate knowledge of the instructions contained in this Manual.
• The recipient must check that the maintenance operations, prescribed in the appropriate chapter, are carried
out and recorded promptly and effectively.
• We accept no responsibility for damage to persons or property resulting from improper use and / or omitted
or inadequate maintenance.
• The recipient has the right to request further information.
In case of loss and/or damage of the present Manual it is responsibility of the recipient to ask for one or more
copies.
To Next Page
Loading...
