Wasp 3MT HDP - 1 General Information; 1.1 Manufacturer Identification Data; 1.2 Identification Label

IntroductIon
© WASP S.r.l.
1
7
General information
1
1 GENERAL INFORMATION
1.1. Manufacturer identification data
WASP S.r.l.
Via Castelletto, 104 - 48024 Massa Lombarda (RA) Italy
Tel. +39 0545 87858
info@3dwasp.com / www.3dwasp.com
1.2. Indentification label
The printer is CE marked and complies with all relevant provisions:
Machinery Directive 2006/42 / EC, EMC Directive 2014/30 / EU and LVD Directive 2014/35 / EU
EN 55022
EN 55024
EN 60204-1
The marking can be identified by means of an identification plate of the Manufacturer as required by the Machinery
Directive. In case of damage, the Recipient must commission a copy.
Legend:
1. Stampante 3D: 3D printer
2. Modello: Model
3. Rif. TCT: Reference
4. Input: input power
5. Potenza Max: Maximum power absorption
6. Corrente a pieno carico: full load current
7. Anno di Produzione: Year of production
8. Numero di serie: Serial number
220v-240v
Stampante 3D
Modello:
WASP 3MT HDP
Rif. TCF: WASP 3MT HDP
Input: 220V-240V 50/60Hz
Potenza Max: 3000W
Corrente a pieno carico: 13,5A
Anno di produzione: 2022
Numero di serie:
MADE IN ITALY
WASP s.r.l. via Castelletto 104
Massa Lombarda (RA) Italy
www.3dwasp.com