12
Chapter 1: System Overview
Manual Contents
This manual describes how to install, set up, and operate CLS200 controllers. Each chapter covers
a different aspect of your control system and may apply to different users:
• Chapter 1: System Overview provides a component list and summary of features for the
CLS200 series controllers.
• Chapter 2: Installation provides detailed instructions on installing the CLS200 series
controller and its peripherals.
• Chapter 3: Using CLS200 provides an overview of operator displays used for system
monitoring and job selection.
• Chapter 4: Setup provides detailed descriptions of all menus and parameters for controller
setup.
• Chapter 5: Enhanced Features describes process variable retransmit, ratio, differential and
cascade control features available with the enhanced features option.
• Chapter 6: Ramp/Soak explains how to set up and use the features of the ramp/soak
option.
• Chapter 7: Turning and Control describes available control algorithms and provides
suggestions for applications.
• Chapter 8: Troubleshooting and Reconfiguring includes troubleshooting, upgrading and
reconfiguring procedures for technical personnel.
• Chapter 9: Linear Scaling Examples provides an example configuring a pressure sensor, a
flow sensor, and an encoder using linear scaling.
• Chapter 10: Specifications lists detailed specifications of the controller and optional
components.
To Next Page
Loading...
