Watlow CLS200 - Processor Connections; TB50 Physical Specifications

CLS200 Series User’s Guide
Chapter 10: Specifications
164
1.00 in.
(25 mm)
1.98 in.
(50 mm)
9.00 in.
(229 mm)
2.44 in.
(62 mm)
Figure 10.3 — CLS200 Clearances with Right-Angle SCSI Cable
Table 10.6 — Processor Connections
Power Terminals (TB2) Captive screw cage clamp
Power Wire Gauge (TB2 22 to 18 AWG (0.5 to 0.75 mm
2
)
Power Terminal Torque (TB2) 4.4 to 5.3 in-lb. (0.5 to 0.6Nm)
Sensor Terminals (TB1) Captive screw cage clamp
Sensor Wire Gauge (TB1)
Thermocouples: 20 AWG (0.5 mm
2
)
Linear: 22 to 20 AWG (0.5 mm
2
)
Communications: 24 AWG (0.2 mm
2
)
Sensor Terminal Torque (TB1) 4.4 to 5.3 in-lb. (0.5 to 0.6Nm)
Output Terminals (TB18) Captive screw cage clamp
Output Wire Gauge (TB18)
Multiconductor cables: 24 AWG (0.2 mm
2
)
Single-wire: 22 to 18 AWG (0.5 to 0.75 mm
2
)
Output Terminal Torque (TB18) 4.4 to 5.3 in-lb. (0.5 to 0.6Nm)
SCSI Connector SCSI-2 female
TB50 Physical Specifications
Table 10.7 — TB50 Physical Dimensions
Weight 0.32 lbs 0.15kg
Length* 4.1 inches 104 mm
Width 4.0 inches 102 mm
Height DIN Rail Mounted 1.5 inches 37 mm
Height Off Panel
(DIN Brackets Removed)
0.92 Inches 23 mm