Watlow CLS200 - Keypad Test; Display Test

CLS200 Series User’s Guide
Chapter 4: Setup
95
Keypad Test
Test the keypad. The test begins automatically when the screen appears.
ALARM
KEYPAD TEST
QUIT = "NO"+"NO"
• Press any key to test the keypad. The controller will display the name of the key you have
pressed.
• Press NO twice to end the test and return to the top of the MANUAL I/O TEST menu.
Display Test
Use this function to test the display.
ALARM
DISPLAY TEST?
Press YES to enter the test and display the instruction screen.
ALARM
TO TEST DISPLAY
Y-TOGGLE N-QUIT
Press YES to display the pixel test pattern.
• Press YES to toggle the pixel pattern.
• Press NO to end the test and return to the top of the MANUAL I/O TEST menu.