Watlow CLS200 - Page 65

CLS200 Series User’s Guide
Chapter 4: Setup
65
3. To select the appropriate menu:
a. Press NO to move from one menu to the next. The menus wrap around; pressing NO
continuously advances through the top level menus.
b. Press YES to enter the displayed menu.
4. To select the parameter to be edited:
a. Press NO to advance from one parameter to the next. Parameters do not wrap around.
b. Press YES to edit the displayed parameter.
5. To edit the parameter setting:
a. Press up or down (YES or NO) to scroll to the value or choice you want to select.
b. Press ENTER to accept the change
- or -
press BACK to cancel the change without saving.
6. Select another parameter and repeat from step 4, or press BACK to return to the top level
menu.
7. Select another menu and repeat from step 3,
- or -
press BACK to exit the setup menus.
The following sections tell more about the parameters for each of the six top level menus. Each
display illustration contains the default value for that specific parameter.