Webasto Thermo Top C

Peugeot 307 Thermo Top C, E
13
Time Switch and
Summer / winter switch option
CAUTION
When installing the time switch, do not press on the
LCD display.
NOTE
The installation location shown for the time switch (1)
and the summer / winter switch (2) is a
recommendation.
Before installing, please confirm the installation
location with your customer.
- Attach the drilling template for the time switch at the
desired position.
- Drill two holes as on the template.
- Remove the template.
- Pull the time switch cable harness through the hole
and connect the plug to the time switch.
- Fasten the time switch (1) with the self-tapping
screw.
- Attach cover to time switch.
- Transfer the hole image for the summer / winter
switch (2) to the desired position and drill Ø 12mm
hole.
- Pull the summer / winter switch cable through the
hole.
- Connect the brown and violet wires, as shown in the
figure, to the switch (lower contacts).
- Fasten the summer / winter switch with the tooth
lock washer and nut.
16
1
2
17