WEG CFW500 - Normas Consideradas; Certificaciones

98 | CFW500
Especificaciones Técnicas
Español
8.2.1 Normas Consideradas
Tabla 8.2: Normas consideradas
Normas de
seguridad
 UL 508C - power conversion equipment
Nota: Suitable for Installation in a compartment handling conditioned air
 UL 840 - insulation coordination including clearances and creepage distances
for electrical equipment
 IEC/EN 61800-5-1 - safety requirements electrical, thermal and energy
 EN 50178 - electronic equipment for use in power installations
 IEC/EN 60204-1 - safety of machinery. Electrical equipment of machines. Part
1: general requirements
Nota: para tener una máquina en conformidad co esa norma, el fabricante de
la máquina es responsable por la instalación de un dispositivo de parada de
emergencia y un equipamiento para seccionamiento de la red
 IEC/EN 60146 (IEC 146) - semiconductor converters
 IEC/EN 61800-2 - adjustable speed electrical power drive systems - part 2:
General requirements - rating specifications for low voltage adjustable frequency
AC power drive systems
Normas de
compatibilidad
electromagnética
 IEC/EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC
product standard including specific test methods
 CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment -
electromagnetic disturbance characteristics - limits and methods of measurement
 IEC/EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 2: electrostatic discharge immunity test
 IEC/EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 3: radiated, radio-frequency, electromagnetic
field immunity test
 IEC/EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 4: electrical fast transient/burst immunity test
 IEC/EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 5: surge immunity test
 IEC/EN 61000-4-6 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 6: immunity to conducted disturbances,
induced by radio-frequency fields
Normas de
construcción
mecánica
 IEC/EN 60529 - degrees of protection provided by enclosures (IP code)
 UL 50 - enclosures for electrical equipment
 IEC/EN 60721-3-3 – classification of environmental conditions - part 3:
classification of groups of environmental parameters and their severities - section
3: stationary use at weather protected locations level 3m4
8.3 CERTIFICACIONES
Certificaciones
(*)
Observaciones
UL y cUL E184430
CE
IRAM
C-Tick
EAC
(*) Para información actualizada sobre certificaciones consultar a WEG.