WEG CFW500 - Normas Consideradas; Certificações

150 | CFW500
Especificações Técnicas
Português
8.2.1 Normas Consideradas
Tabela 8.2: Normas consideradas
Normas de
segurança
 UL 508C - power conversion equipment.
Note: suitable for Installation in a compartment handling conditioned air
 UL 840 - insulation coordination including clearances and creepage distances
for electrical equipment.
 IEC/EN 61800-5-1 - safety requirements electrical, thermal and energy.
 EN 50178 - electronic equipment for use in power installations.
 IEC/EN 60204-1 - safety of machinery. Electrical equipment of machines. Part 1:
general requirements.
Nota: para ter uma máquina em conformidade com essa norma, o fabricante
da máquina é responsável pela instalação de um dispositivo de parada de
emergência e um equipamento para seccionamento da rede.
 IEC/EN 60146 (IEC 146) - semiconductor converters.
 IEC/EN 61800-2 - adjustable speed electrical power drive systems - part 2:
general requirements - rating specifications for low voltage adjustable frequency
AC power drive systems.
Normas de
compatibilidade
eletromagnética
 IEC/EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC
product standard including specific test methods.
 CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment -
electromagnetic disturbance characteristics - limits and methods of measurement.
 IEC/EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 2: electrostatic discharge immunity test.
 IEC/EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 3: radiated, radio-frequency, electromagnetic
field immunity test.
 IEC/EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 4: electrical fast transient/burst immunity test.
 IEC/EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and
measurement techniques - section 5: surge immunity test.
 IEC/EN 61000-4-6 - electromagnetic compatibility (EMC)- part 4: testing and
measurement techniques - section 6: immunity to conducted disturbances,
induced by radio-frequency fields.
Normas de
construção
mecânica
 IEC/EN 60529 - degrees of protection provided by enclosures (IP code).
 UL 50 - enclosures for electrical equipment.
 IEC/EN 60721-3-3 - classification of environmental conditions - part 3:
classification of groups of environmental parameters and their severities - section
3: stationary use at weather protected locations level 3m4
8.3 CERTIFICAÇÕES
Certificações
(*)
Observações
UL e cUL E184430
CE
IRAM
C-Tick
EAC
(*) Para informação atualizada sobre certificações consultar a WEG.