12 | CFW500
General Information
English
Check if:
The identification of the CFW500 matches the model purchased.
Any damages occurred during transportation.
Report any damage immediately to the carrier.
If the CFW500 is not installed soon, store it in a clean and dry location (temperature between
-25 °C and 60 °C (-77 ºF and 140 ºF)), with a cover to prevent dust accumulation inside it.
ATTENTION!
When the inverter is stored for a long period, it becomes necessary to perform
the capacitor reforming. Refer to the procedure recommended in Section 6.4
PREVENTIVE MAINTENANCE on page 38 - of this manual.
To Next Page
Loading...
