Wegener DTV 720 - Page 37

DTV 720 USER’S MANUAL
www.wegener.com 31 800043-01 Rev. C
Press the vv key to go to Clear Errored Seconds (if the counter is non-zero).
Press the ESC key to go to the Home screen.
Second-Level Input Setup Screens
ASI Input 1 Screen
Press ENT to display the state of ASI Input 1 (ON or OFF). Press ENT again and use the r r
or ss keys to select either ON or OFF, enabling or disabling this input. Press ENT again to
confirm your selection.
Press the ww key to go to ASI Input 2.
Press the ESC key to return to the Input Setup screen.
Press the ESC key again to return to the Home screen.
ASI Input 2 Screen
This screen has the same functions as ASI Input 1 screen, but applies to ASI Input 2.
Press the ww key to go to RF Input 1.
Press the vv key to go back to ASI Input 1.
Press the ESC key to return to the Input Setup screen.
Press the ESC key again to return to the Home screen.
RF Input 1 Screen
Press ENT to go to the third-level Tuner Enable Screen.
Press the ww key to go to RF Input 2 Setup.
Press the vv key to go back to ASI Input 2.
Press the ESC key to return to the Input Setup screen.
Press the ESC key again to return to the Home screen.
ASI Input 1
ASI Input 2
RF Input 1