DTV 720 USER’S MANUAL
800043-01 Rev. C 32 www.wegener.com
RF Input 2 Screen
Functions on this screen are identical to those for RF Input 1 but apply to RF Input 2.
Press ENT to go to the third-level Tuner Enable Screen.
Press the vv key to go back to RF Input 1.
Press the ESC key to return to the Input Setup screen.
Press the ESC key again to return to the Home screen.
Third-Level Input Setup Screens
Tuner Enable Screen
Press ENT and the rr or ss keys to select ON or OFF, enabling or disabling this input.
Press ENT again to confirm.
Press the ww key to go to the Channel Number screen.
Press the ESC key to return to the RF Input screen.
Channel Number Screen
Press ENT and the rr or ss keys to select the desired channel. Press ENT again to confirm.
Press the ww key to go to the RF Standard screen.
Press the vv key to go back to the Tuner Enable screen.
Press the ESC key to return to the RF Input screen.
RF Standard Screen
Press ENT and the rr or ss keys to select either Broadcast or CATV. Press ENT again to
confirm.
Press the ww key to go to Channel Number.
Press the ESC key to return to the RF Input Screen.
RF Input 2
Tuner Enable:
ON
Channel Number:
10
RF Standard:
Broadcast
To Next Page
Loading...