上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
47 / 61
1. In the left Configuration list, double-click MCodeConfig to open the MCodeConfig
page on the right:
2. Select the target row and double-click the target MCode field to modify the M code.
8.3.2 Configure Function Buttons
In NcConfig, you can add or delete function buttons in NcStudio.
Available function buttons include those for spindle switch, going to workpiece origin,
cooling, vacuum pump, lubrication, etc.
Before configuring function buttons, tick required machine parts on the Components page.
Follow the steps below to configure function buttons:
1. In the left Configuration list, double-click PanelConfig to open the PanelConfig
page on the right:
2. To add a function button, click the pull-down menu at the target position and select
the target function. To remove an existing function button, click the pull-down menu
of the function button and select the first blank option. The removed button will no
longer be displayed in NcStudio.
To Next Page
Loading...
General