上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
52 / 61
2. Set the Enable switch of the target port to ON.
3. Double-click the Protection Type field of the target port and select a protection
type in the pull-down menu.
4. Select one from the following methods to save the changes:
o To save changes on the current page, click under the menu bar.
o To save changes on all pages, click under the menu bar.
The * symbol on an open window tab indicates that the changes on the page have not
been saved. The * symbol disappears after changes on the page are saved.
8.6 Creating Multi-configuration Installation Package
You can create a complete installation package in the current system to keep a backup of
the system files and a steady version of system.
Note: A multi-configuration installation package includes all folders whose names are
started with "DefaultConfig".
Follow the steps below to create a multi-configuration installation package:
1. In the menu bar, go to File > Multi-Config Pack Up.
2. Enter a name and storage path for the installation package.
3. Set the parameters as desired.
After generating an installation package, you can find it under the selected path.