Weiler E1650 - Page 25

WEILER E1650 REMIXING TRANSFER VEHICLE
2-5
Machine Controls
2
Machine Controls
(7) Electronic Display
Refer to
"Electronic Display Navigation", page 2-21
for additional information.
(8) Park Brake Button
Press and release to cycle park brake on/off.
(9) Propel 3-Speed Button
Press and release to cycle work low, work high, and transport speed.
WARNING
Brake application is abrupt if applied when machine is in motion.

Apply park brake only when machine is stopped, unless required by
emergency.
Transport - High speed/low torque mode.
Work High - Medium speed/high torque
mode.
Work Low - Low speed/high torque mode.
7
8
9