Need help?Do you have a question about the Whistler WS1040 and is the answer not in the manual?
General| Channels | 1800 |
|---|---|
| Display | LCD |
| Power Source | AA batteries or AC adapter |
| CTCSS/DCS | Yes |
| Trunking | Motorola, EDACS, LTR |
| Close Call RF Capture | Yes |
| Priority Scan | Yes |
| Weather Alert | YES |
| Type | Handheld |
| Digital Modes | P25 Phase I |
| Modulation Modes | AM, FM |
| PC Connectivity | Yes |
| Frequency Coverage | 25-54 MHz, 108-174 MHz, 216-512 MHz, 764-960 MHz, 1240-1300 MHz |
Explains the concept of Object Oriented Scanning and its benefits for programming receivers.
Lists the items included with the WS1040 scanner.
Highlights the scanner's advanced capabilities and user interface.
Instructions for connecting the scanner's antenna.
Important warnings and guidelines for safe outdoor antenna installation and grounding.
Details on installing alkaline and rechargeable batteries, including warnings.
Provides advice on battery maintenance, charging, and low power indicators.
Instructions for powering the scanner using AC or vehicle adapters.
Guidance on attaching and removing the scanner's belt clip.
Information on connecting headphones or external speakers.
Precautions to protect hearing and ensure safe operation while using headphones.
Identifies and explains the functions of the scanner's keys and controls.
Details the functions of softkeys and the four-direction keypad.
Steps to power on the scanner and adjust squelch and volume.
Instructions for configuring the scanner for alkaline or rechargeable batteries.
Explains the meaning of various icons shown on the scanner's LCD.
Details on using the PC/IF cable for scanner programming via software.
Information about RadioReference.com's database, forums, and wiki for scanner enthusiasts.
Procedure for transferring scanner programming between compatible models.
Introduction to the manual programming guide and context-sensitive help.
Guide to entering text characters and symbols using the keypad.
How to edit and insert predefined text phrases for faster data entry.
Explains scannable objects, scan lists, and how to organize them.
Instructions for naming, assigning, and changing default scan lists.
How to designate priority to objects and enable priority scanning.
How to add objects to the Favorites Scan List and clear it.
Explanation of temporary, permanent, and talkgroup lockout types.
Instructions for removing lockouts and editing the Search Lockout List.
How to tune to a frequency or monitor a specific object.
Methods for locating objects by text string or object type.
How to initiate scanning and interpret scanner display during reception.
Steps to enable scan lists using global settings.
Steps to initiate tune and limit searches and set frequency limits.
How to perform service searches and Spectrum Sweeper searches.
Creating and beginning a Limit Search Object.
Reference for settings and parameters within the LMIT object.
Creating and beginning a Service Search Object.
Reference for settings and parameters within the SRVC object.
Creating and beginning a Spectrum Sweeper search.
Reference for settings and parameters within the SWPR object.
How to use weather radio mode and activate Weather Priority.
Setting up SAME standby for weather alerts and defining alert areas.
Guide to creating SAME entries, using wildcards, and understanding menu options.
Instructions for activating and exiting SAME standby mode.
Introduction to global settings that store radio-wide configurations.
Details on various global settings like Atten Mode, Scan Lists, and LED options.
Coverage of advanced global parameters like Priority, Search Delay, and TGRP Ignore.
How to reset global radio parameters to factory defaults without losing working memory.
Procedure to reset the entire scanner to factory defaults, clearing all data.
Power-on key sequences for accessing configuration items and upgrade modes.
Explanation of V-Scanner storage for multiple memory configurations.
Instructions for loading saved configurations and erasing V-Scanner folders.
Creating and configuring conventional channel objects.
Reference for settings and parameters within CONV objects.
Creating and defining parameters for trunked radio systems.
Reference for settings and parameters within TSYS objects.
Creating and configuring talkgroup objects for trunked systems.
Reference for settings and parameters within TGRP objects.
Method for creating exact copies of existing objects.
How objects without scan list mappings are placed in the NS Scan List.
Procedure for deleting objects and the caution regarding TSYS objects.
How to display and view the scanner's memory usage report.
How to turn on, view, and clear the Hit Counter feature.
Details on working memory, virtual scanners, and preprogrammed searches.
Lists frequency bands for Spectrum Sweeper and service searches.
Covers CB, Marine, Weather frequencies, scanning rates, display, and audio output.
Comprehensive list of frequency ranges and their corresponding step sizes and modes.
Guidelines for keeping the scanner clean and protected.
Procedure to identify and lock out internal scanner frequencies causing interference.
Details on PC requirements and installing USB drivers for scanner connection.
How to view COM port settings and resolve installation issues.
Provides the FCC compliance statement and operating conditions.
Details the limited warranty period, terms, and conditions.
Steps for returning the unit for warranty service, including required information.
Information on out-of-warranty service fees and customer service contact details.
To Next Page
