Wieland SP-SDIO - Page 100

To Next Page

To Previous Page

Appendix

Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)

100

Error No.

Error type

Logbook message

System behavior

Remedy

220101F9 Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

220101FA Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

220101FC Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

22010226 Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

22010227 Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

22010228 Warning Error in system configuration Configuration requi-

red

Reload system confi-

guration

22010231 Warning Pulse period 0 must have pulse

length 0.

Configuration requi-

red

Change system con-

figuration and reload

22010232 Warning Pulse length must be <= pulse peri-

od/2.

Configuration requi-

red

Change system con-

figuration and reload

22010233 Warning Impermissible test period (permissib-

le: 0,40,200,400,600,800,1000).

Configuration requi-

red

Change system con-

figuration and reload

22010234 Warning Pulse length must be multiple of 4

and in range from 4 to 100ms

Configuration requi-

red

Change system con-

figuration and reload

22010240 Warning Maximum count of function blocks

or mapping exceeded

Configuration requi-

red

Change system con-

figuration and reload

22010241 Warning The number of IO modules is diffe-

rent in the configuration

Configuration requi-

red

Change system con-

figuration and reload

22010242 Warning The number of Gateway modules is

different in the configuration

Configuration requi-

red

Change system con-

figuration and reload

22010243 Warning The major version of the CPU modu-

le and project file differs.

Configuration requi-

red

Change system con-

figuration and reload

22010244 Warning The major version of the IO module

and project file differs.

Configuration requi-

red

Change system con-

figuration and reload

22010245 Warning The major version of the gateway

module and project file differs.

Configuration requi-

red

Change system con-

figuration and reload

22010250 Warning function blocks for presses are not

supported by this device

Configuration requi-

red

Change system con-

figuration and reload

2201xxxx Warning Error in the configuration Configuration requi-

red

Change system con-

figuration and reload

23010001 Warning Processing error at I1/I2 System continues to

run

23010003 Warning Processing error at I3/I4 System continues to

run

23010005 Warning Processing error at I5/I6 System continues to

run

23010007 Warning Processing error at I7/I8 System continues to

run

23010009 Warning Processing error at I9/I10 System continues to

run

2301000B Warning Processing error at I11/I12 System continues to

run

2301000D Warning Processing error at I13/I14 System continues to

run

Main Page

Wieland SP-SDIO - Page 100

Table of Contents

Related product manuals