Product description
Wieland Electric GmbH | BA000966 | 07/2016 (Rev. C)
Product description
888337163
This section will provide you with information on the properties of the samosPRO system and
describes the setup and function.
System properties
888338699
Illustration 1: Modular samosPRO safety control
The samosPRO system is characterized by the following system properties:
• Modular setup: 1 COMPACT module and up to 12 input/output expansion modules, each
of which has an overall width of 22.5 mm
• 16 to 116 inputs and 4 to 56 outputs
• Programmable using samosPLAN5+
• Can use up to 300 standard and application-specific logical blocks
• Standard logical blocks: AND, OR, NOT, XNOR, XOR
• Application-specific logical blocks: Emergency stop, two-hand, muting, operating mode
selection switch, reset, restart
• Can be integrated into different networks using gateways (e.g. ProfibusDP, CANopen,
Modbus/TCP, etc.)
The samosPLAN5+ programming software is available for configuring the control tasks.
You can find the programming software on the Internet or on CD:
• http://www.wieland-electric.com
or
•
samosPLAN5+ CD [ch. 13, p. 88]
To Next Page
Loading...
