Manual 37365A GCP-30 Series Packages - Genset Control
© Woodward Page 143/179
Current Slave Pointer
A current slave pointer, which records and stores the maximum generator current, is implemented in the control.
The display of the maximum generator current can be selected in the Automatic mode by pressing the "Mes-
sage" button. The following screen appears in the display:
Parameter 286
000 000 000 000
max. Gen.current
Current slave pointer; display of the maximum generator current
The maximum generator current in each phase is displayed.
Reset: Pressing and holding the "reset" button for 3 seconds while the current slave
pointer screen is being displayed will reset the memory.
To Next Page
Loading...
