Data storage
203
Note
If there are large amounts of data, you may have to wait for
a few seconds until a data record is displayed.
6 Use 82 to switch a filter, e. g. Mem No., on or off (on/
off).
7 Switch to the next input field with [Next]. Complete all
inputs.
8 Option:
Select a digit with
46.
9 Increase/reduce values or switch a filter on/off with
82.
10 Close the input window with [ESC].
The first data record meeting the selected criterion is
displayed.
11 Swap between the data records meeting the selected
filter criterion with
82.
12 Terminate the storage display with [ESC].
To Next Page
