wtw Multi 3620 IDS User Manual

Settings Multi 3620 IDS
81 ba77169e01 04/2016
Menu item Possible
setting
Explanation
Calibration /
Calibration record
- Displays the calibration record of
the last calibration.
Calibration /
Calibration data
storage / Display
- Displays the last calibration
records (max. 10)
Calibration /
Calibration data
storage / Output to
USB flash drive or
printer
- Outputs the stored calibration data
to the USB-A interface (USB mem-
ory device/USB printer)
Calibration /
Calibration data
storage / Output to
RS232/USB
- Outputs the stored calibration data
to the USB-B interface (PC)
Calibration /
Calibration interval
1 ... 180 ...
999 d
Calibration interval for the D.O.
sensor (in days).
The meter reminds you to calibrate
regularly by the flashing sensor
symbol in the measuring screen.
FDO Check /
Start FDO Check
- Starts the FDO
®
check procedure
FDO Check /
Check interval
1 ... 60 ...
999 d
Interval for the FDO Check (in
days).
The meter reminds you to check
the sensor regularly by FDO
Check status indicator in the mea-
suring screen.
Sal automatic on
off
Automatic salt content correction
for concentration measurements.
The measured salinity value is
taken over by a connected conduc-
tivity sensor.
This menu item is only available if
an IDS conductivity sensor is con-
nected.
Salinity from chan-
nel
▭▭▬
▭▬▭
▬▭▭
Selection of the channel from
which the salinity value should be
taken over.
This menu item is only available if
two IDS conductivity sensors are
connected.
Sal correction on
off
Manual salt content correction for
concentration measurements.

wtw Multi 3620 IDS Specifications

General

Brand	wtw
Model	Multi 3620 IDS
Category	Measuring Instruments
Language	English