Safety OxiTop
®
Control OC 100
10 ba31114e06 06/2012
2.2.2 Requirements for safe operation
Note the following points for safe operation:
• The instrument may only be operated according to the authorized use spec-
ified above.
• The instrument may only be supplied with power by the energy sources
mentioned in this operating manual.
• The instrument may only be operated under the environmental conditions
mentioned in this operating manual.
• The instrument may only be opened if this is explicitly described in this oper-
ating manual (example: Changing the batteries).
2.2.3 Unauthorized use
The instrument must not be put into operation if:
• it is visibly damaged (e.g. after being transported)
• it was stored under adverse conditions for a lengthy period of time (storing
conditions, see section 11 T
ECHNICAL DATA, page 77).
To Next Page
Loading...
Need help?
General
