GLP/TOOLS OxiTop
®
Control OC 100
56 ba31114e06 06/2012
7.6.2 Reset/release
This function can be used to release measuring heads again that were uninten-
tionally started.
After carrying out the - Reset/release function the data of the
measuring head are erased!
MAINTENANCE menu:
Select the - Reset/release
menu item with <><>.
The serial number of the
measuring head and the sample
number appear on the display.
- Reset/release
Confirm with <RUN/ENTER>.
The release for the measuring
head has been performed..
-Back:
(measuring head not released)
Display message:
Reset performed!
Repeat the procedure for each
measuring head to be released.
Display message when the last measuring head of a sample
has
been released:
Use <RUN/ENTER> to return to
the RESET/RELEASE menu.
To Next Page
Loading...
