Maintenance, cleaning, disposal OxiTop
®
Control OC 100
66 ba31114e06 06/2012
9.2 Cleaning
9.2.1 Cleaning of the sample bottles
See application reports.
9.2.2 Cleaning of the controller and measuring heads
Occasionally wipe the outside of the measuring instrument with a damp, lint-
free cloth.
NOTE
The housing is made of synthetic material (ABS). Thus, avoid contact with ace-
tone or similar detergents that contain solvents. Remove any splashes imme-
diately.
9.3 Disposal
At the end of its operational lifetime, the instrument must be returned to the
disposal or return system statutory in your country. If you have any questions,
please contact your supplier.
To Next Page
Loading...