Operating mode: BOD Standard / BOD Routine OxiTop
®
Control OC 100
26 ba31114e06 06/2012
5.4.2 Erasing data of finished samples
This function erases the data of finished samples from the SAMPLE STATUS
TYPE list ( sample management) of the controller. You can only erase a sample
if it is finished; in non-finished samples, the menu item - Erase sample does not
appear.
SAMPLE STATUS TYPE list
(sample management)
Use <><> to select a fin-
ished sample.
Select the -Erase sample menu
item with <><>
Safety prompt with possibility to
return.
The sample was erased.
After the message, the controller automatically returns to the
SAMPLE STATUS TYPE list (sample management).
To Next Page
Loading...
