wtw OxiTop C - Measuring Head Information

GLP/TOOLS OxiTop
®
Control OC 100
48 ba31114e06 06/2012
7.5.2 Measuring head information
SHOW  menu:
Preselected:
- Show free 
Use <><> to select either
- Free  or
-All 
.
Point the controller at the measuring
heads:
All the measuring heads that are addressed flash for 5 sec-
onds.
CHECK menu:
Select the -  info menu item
with <><>.
The measuring head flashes.
A display appears on the
controller giving the following
information:
 Series number of the measur-
ing head,
 Battery status
(OK/LOBAT/EMPTY!!),
 The next calibration date
(only BOD Standard mode)
 Status of the measuring head
(free/used/defective).
RUN/ENTER
40 cm to 1 m
RUN/ENTER
RUN/ENTER