OxiTop
®
Control OC 100 GLP/TOOLS
ba31114e06 06/2012 49
If the measuring head is "used":
Use <><> to scroll
through the display of further
information:
– Start date
– Final date
– Sample number
– Type and
– Measuring range of the
measurement
Use <RUN/ENTER> to return
to the CHECK menu.
Repeat the procedure for each
measuring head.
If the measuring head does not respond, the following display
appears after approximately 7 seconds:
Query stopped!
You can select between
- Continue query (see above)
and
-Stop (return to the CHECK
menu)
To Next Page
Loading...
