GLP/TOOLS OxiTop
®
Control OC 100
40 ba31114e06 06/2012
7.4 Settings
With this function you can undertake or change settings. The table below
shows the settings in the delivery state.
7.4.1 Operating mode
You can select the following operating modes:
BOD Standard
BOD Routine
GLP/TOOLS menu.
Select the - Settings menu item with
<><>
Setting Default setting (bold)
and setting range
Operating mode BOD Routine BOD Standard
Operational life 5 days
(0.5 h to 99 days)
5 days
(0.5 h to 99 days)
Date current current
Time current current
GLP Off
(permanently set)
On
Off
Calibration interval --- 12 months
to 36 months
Clearing the memory automatic
or manual
automatic
or manual
AutoTemp On
(permanently set)
On
Off
Switch-off interval 5 minutes
(permanently set)
5 minutes
to 15 minutes
Language German German
SETTINGS menu:
Select the - Operation mode
menu item with <><>.
To Next Page
Loading...
