OxiTop
®
Control OC 100 Operating mode: BOD Standard / BOD Routine
ba31114e06 06/2012 23
Preselected:
- Continue transfer:
A new pass is made only for
measuring heads that have not
yet responded.
Return to the entry menu with
-Stop
For information on searching for
missing measuring heads, see
section 10 W
HAT TO DO IF..., page
67
Point the controller at the measuring
heads:
The call up of further measuring
heads is performed in the
scanner mode.
Message that all the data of all
the measuring heads has been
called up. The instrument then
returns to the entry menu.
Immediately after the complete measurement data records of a
finished measurement have been called up, the corresponding
measuring head is given the free status. The measuring head can
be used for a new measurement. The relevant sample in the
SAMPLE STATUS TYPE list (sample management) is marked as
finished (see section 5.4 SAMPLE STATUS TYPE
LIST (SAMPLE
MANAGEMENT), page 24), as soon as the measurement time has
expired and the data of all measuring heads of this sample have
been called up.
To Next Page
Loading...
