Operating mode: BOD Standard / BOD Routine OxiTop
®
Control OC 100
28 ba31114e06 06/2012
Jumps to submenu of the
selected sample.
Preselected: - Call up data
Point the controller at the measuring
heads:
Sequential call up of the
measuring heads allocated to
the sample (in this example: 7)
in the scanner mode:
The controller
stores the data obtained
updates the
SAMPLE STATUS TYPE
list (sample management)
Duration of a pass:
approx. 3 seconds for 12 mea-
suring heads in a stirring sys-
tem.
The controller confirms the call
up performed.
The controller then returns
automatically to the submenu.
If the measuring heads do not all respond, the following dis-
play appears:
Renewed start of the data call
up.
To Next Page
Loading...
