Participant Guide Xerox 6204 Wide Format Solution
4
Disconnecting the machine from the AC power
If it becomes necessary to unplug the machine from the AC power
source, be sure to perform a full system shutdown. When
reconnecting the machine, be sure to plug the power cord into an
outlet with the correct AC rating.
Cleaning
Before performing any cleaning tasks, make certain that the
machine is powered off and unplugged from the AC power outlet.
Use only cleaning materials approved for the Xerox 6204 Wide
Format Solution.
Moving the machine
Do not move the Xerox 6204 Wide Format Solution Copier/Printer
or Xerox 6204 Wide Format Solution Printer once it is installed. The
machine should be moved only by trained employees of Xerox
Corporation or an authorized service agent.
Additional safety notes
• Never insert objects of any kind into the printer.
• Never remove covers or guards that require a tool for removal.
• Never attempt to perform any maintenance that is not specified
in the User Manual.
Calling for service
Turn the power off, unplug the machine, and call for service if any
of the following occur:
• The power cord to the machine becomes damaged or frayed
• A liquid is spilled into the machine
• The machine has been exposed to rain or water
• The machine is producing unusual noises or odors
• The machine has been damaged
Safety hotline
Call Xerox with any safety questions you may have. Ask your
Xerox service representative to provide you with the phone number.
Illegal Copies and Printouts
Your User Guide presents example of documents which are known
to be illegal to copy or print in some countries. As the User Guide
states, “In case of doubt, contact your legal counsel.”
Refer to the section Powering the System
On/Off in Chapter 2 Product Overview of the
User Guide.
Refer to the Chapter 9 Maintenance in the
User Guide.
To Next Page
Loading...
Need help?
General
