Participant Guide Xerox 6204 Wide Format Solution
16
Activity – Make Original Size and Media Settings
1. Following the procedure in Size Series Settings for Originals
in 2 Product Overview, set the Original Size Series to
[ARCH-1).
2. Following the procedure in Media Settings in 2 Product
Overview, set up the media parameters for the roll media you
loaded earlier. Be sure also to specify the correct Media Series
(ARCH-1/ANSI/ISO, etc.) whenever you load media.
3. Ask your service technician if you have any questions about
media types/sizes, media loading, or media cutting.
To Next Page
Loading...
