Participant Guide Xerox 6204 Wide Format Solution
48
If there are any saved templates, the numbers assigned to
them will appear in the [Templates in use] field.
5. Select an unused number for the template being created, and
enter it using the numeric keypad. Acceptable numbers range
from 0 to 9.
6. Press the Save Template button. The settings of the just
completed copy job will be saved as a template, identified by
the number you assigned.
7. Press Clear All.
8. To see how the Store/Recall feature differs from the Copy from
Memory feature, and to prepare for the upcoming activity, place
a different job in memory by running one copy of a 24” x 36”
line drawing.
Use the following settings:
R/E: 100%
Media Source: Auto
Media Type: Bond
Output Format: Synchronized
Copy Quantity: 1
Original Type: Text/Line
9. Copy the 24” x 36” line drawing.
10. Press Clear All.
Activity 2 – Recall a Template
1. Press the Store/Recall button on the [Menu] screen.
2. Select the Copy Job Templates button when the [Store/Recall]
menu appears.
3. After the [Copy Job Templates] screen displays, enter on the
numeric keypad the number of the template you created, and
then press the Recall Template button.
The saved job settings will be recalled.
4. Press the Close button on both the [Copy Job Templates]
screen and the [Store/Recall] menu to return to the [Menu]
screen.
5. Press the Copy button on the [Menu] screen.
6. Without making any setup selections on the Touch Screen,
copy the 12” x 18” line drawing with border again.
The machine will produce two copies which are identical to
those you printed earlier.
7. Press Clear All.
To Next Page
Loading...
Need help?
General
