Xerox 6204 Wide Format Solution Participant Guide
37
Image Quality Activity 4 – Adjusting the Contrast
Refer to 3 Copy – Contrast in the User Guide as you perform the
activity.
1. Before adjusting the contrast setting, make one copy of the
original at the settings below.
R/E: 100%
Media Source: Select the 18” (B/A3) roll
Media Type: Not applicable
Media Cut Mode: Synchronized
Copy Quantity: 1
Original Type: Photo
2. Press the Image Quality tab.
3. Press the Contrast button.
4. On the [Contrast] screen, press the Up button until the highest
setting is selected.
5. Press the Save button.
6. Feed the photographic original into the scanner, LEF, and
make one copy.
7. Now reselect the Contrast button, and press the Down button
to change the contrast to the lowest setting.
8. Press the Save button.
9. Feed the original into the scanner and make one copy.
10. Compare the contrast of the three copies and select the one
with the best image quality.
11. Press Clear All.