Xerox 6204 Wide Format Solution Participant Guide
17
7 Making Standard and Non-Standard Copies
The information in this section will enable you to make copies using
the Xerox 6204 Wide Format Copier/Printer. In addition to setting
up the jobs on the Control Panel, you will learn about selecting the
correct Output Format (Synchronized, Preset, or Manual media cut
modes), and how to stop and resume a copy job.
Objectives
Upon completion of this module, you will be able to:
• Correctly feed an original into the scanner
• Set up and perform a one page copy job of a standard sized
document
• Set up and perform a one page copy job of a non-standard
sized document
• Stop a copy job that is in progress and then resume it.
Reading Activity
Read the following sections in the Xerox 6204 Wide Format
Solution User Guide before setting up the jobs and running copies.
2 Product Overview:
Usable Originals
Size Series Settings for Originals
3 Copy:
Copying Procedure
Stopping Scanning & Copying
Output Format
Note: You will find additional information about original documents in
Appendix A. Image Quality. The guidelines presented there may
help you prevent or solve image quality concerns.
Resources Required
24” x 36” (D/A1) test pattern (or line drawing)
12” x 36” non-standard original (or the above test pattern
folded in half)