Participant Guide Xerox 6204 Wide Format Solution
24
3. Press the Interrupt button when the lead edge of the first print
begins to exit the machine.
The Interrupt button indicator will illuminate, and the machine
will print one or two more prints before it stops.
When printing stops, the [Copy] screen will replace the [Print
Status] screen.
4. Keep the same copy job set up as in the previous activity:
Reduce/Enlarge: 100%
Media Source: Auto
Media Type: Bond
Original Type: Text/Line
Copy Quantity: 3
Scan Direction: LEF
5. Scan the original and allow the copies to print.
6. After the copies exit the machine, press the Interrupt button to
cancel the Interrupt Mode.
The Interrupt lamp will go out, and the machine will resume the
print job.
7. Press Clear All.
To Next Page
Loading...
