Xerox 7142 Service Manual

8 Maintenance RJ-901C/RJ-900C Maintenance Manual
8-4
8.3 Part Life Information
This section shows how to check the life of the service parts.
To know the life of the service parts, check the maintenance counter from the counter display menu in the
maintenance mode2.
TIP
"6.3.1 Counter Display Menu" p.6-3
Part life information of this plotter is shown in the table below.
Table 8-2 List of Parts Life Expectancy
Part Life expectancy Warning
display
How to
restore
Replacement
parts
References
Cutter Approx. 2,000
sheets
Not displayed By
pressing
[Enter]
key when
replacing
the counter
to the new
one
Cutter (replaced
by users)
-
Waste fluid tank Warning at
900,000 times of
counting
(equivalent to
900cc)
Full Waste
Ink Tank
By
pressing
[Enter]
key while
replacing
the counter
to the new
one.
Waste ink box
(Replaced by
users)
-
Cleaning unit 9,000 sheets *1
(Warning at 3,000
times of wiping)
Warning
Wiper Life
Counter
clear
• Ink system
• Cleaner head
(Cleaning
wiper)
• Flushing box
• Absorber
under the
maintenance
base absorber
"4.7.2
Replacing
Pump Cap
Assembly"
p.4-52
"4.7.3
Replacing
Cleaner Head
(Cleaning
Wiper)" p.4-
53
"4.7.4
Replacing
Flushing Box
Assembly"
p.4-54

Xerox 7142 Specifications

General

Brand	Xerox
Model	7142
Category	Printer
Language	English