RJ-901C/RJ-900C Maintenance Manual 7 Adjustment
7-3
7.1 Introduction
This chapter provides information on necessary adjustment items and procedures.
TIP
"10.4 Jigs and Tools" p.10-7
7.2 Adjustment Item
This section describes the adjustment items required in part replacement procedures.
When you adjust or replace any of the maintenance parts listed in "Table 7-1 Adjustment Item List", you must
always adjust the printout quality using the self-diagnosis function referring to Table 7-1"Adjustment Item
List"(p.7-3).
To Next Page
Loading...
