Xerox 7142 - Command Errors

9 Troubleshooting RJ-901C/RJ-900C Maintenance Manual
9-16
NOTE
The square bracket pair in a message may contain the applicable command code.
Table 9-4 Symptoms and Check Items for Data Errors
No. Message Event/
symptom
Check item Action Reference
1 I 15-1 error
command [ ]
Online frame
error
1. Attempt
communication
using PC and cable
on hand.
2. Is there any error
statement in
printing data?
3. Does the symptom
remain the same
even if application
driver is replaced?
4. Main board
assembly may be
defective.
•Contact our
customer support
center.
• Replace application
driver.
• Obtain printing
data.
•Contact our
customer support
center.
• Replace main board
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-21
2 I 15-2 error
command [ ]
Overrun error
3 I 15-3 error
command [ ]
Online parity
error
4 I 05 error
command [ ]
Sum check
error
5 I 07 error
command [ ]
ECS parameter
6 I 11 error
command [ ]
Undefined
ESC
1. Attempt
communication
using PC and cable
on hand.
2. Is there any error
statement in
printing data?
3. Does the symptom
remain the same
even if application
driver is replaced?
4. Main board
assembly may be
defective.
•Contact our
customer support
center.
• Replace application
driver.
• Obtain printing
data.
•Contact our
customer support
center.
• Replace main board
assembly.
"4.3.3
Replacing
Main Board
Assembly"
p.4-21
7 I 12 error
command [ ]
Unauthorized
character ESC
8 I 13 error
command [ ]
Numeral
character ESC
9 I 14 error
command [ ]
Parameter error
ESC
10 I 16 error
command [ ]
Buffer
overflow